The CX-Series Amplifiers from the renowned car audio manufacturer Kicker are no different. Because of their clean, strong, and dependable performance, these amplifiers are a favorite among car audio fans.
Covering a wide range of systems, the CX-Series fits best whether you’re just looking to squeeze a little bit more performance out of your factory radio or you’re prepared to blow the roof apart with a whole aftermarket configuration. In either case, the core of the CX Series is the quality of your sound. The functionality of the amplifiers is completed by sleek, straightforward appearance and flexible mounting options.
Get to know more about the CX Series and what makes them one of the best amplifiers to consider adding to your car audio system.
Kicker CX-Series Car Amplifier Features
The CX-Series Amplifiers are available in a wide range of wattages and sizes, making them suitable for use in a wide variety of vehicles and stereo setups. Without modifying your radio or installing a line-out converter, its technology delivers crisp, powerful sound in virtually any vehicle on the road today. It is possible to run these robust amplifiers with a 9-volt battery and feed them an input signal of up to 40 volts (400 watts) at the speaker level. Very effective noise cancellation, even with high-end factory stereos, is yours with Kicker’s FIT+TM (Fail-safe Integration Technology-PLUS).
The CX-Series Amplifiers stand out in large part due to their adjustable crossover, which allows customers to fine-tune the sound to their liking. The sound output is completely adjustable since this crossover may be adjusted to high-pass, low-pass, or full-range operation.
The remote bass control on the CX-Series Amplifiers is a nice touch that allows users to modify the bass from the vehicle’s cockpit. Those who like listening to music with a lot of low frequencies will find this especially helpful because it allows them to control the volume without having to mess with the amplifier’s controls.
Thermal protection, short circuit protection, and DC offset prevention are just some of the safety features standard on CX-Series Amplifiers. In addition to extending the life of the amplifier and the rest of the car’s electrical system, these safeguards ensure that the stereo will continue to sound great for years to come.
Available Kicker CX-Series Car Amplifiers Models at Sonic Electronix
The CX Series covers a wide range of systems, from those looking to enhance their stock radio to those looking to go all out with an aftermarket installation. The CX Series was designed from the ground up with sound quality as its priority. The amplifiers’ features are rounded out by their minimalist design and adaptability during setup.
Here are all the Kicker CX-Series car amplifiers that are currently available for purchase at Sonic Electronix:
Kicker CXA300.4 Amplifier (43CXA3004)
• 75 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 – 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16″W x 12-7/16″L x 2-3/8″H
Kicker CXA360.4 (46CXA3604)
• 65 Watts RMS x 4 @ 4 ohms
• 90 Watts RMS x 4 @ 2 ohms
• 180 Watts RMS x 2 @ 4 ohms (bridged)
• Class A/B 4-Channel Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Kicker CXA400.1
• 150 watts x 1 channel @ 4 ohms
• 300 watts x 1 channel @ 2 ohms
• 400 watts x 1 channel @ 1 ohm
• Total RMS Power: 400 watts
• CEA-2006 Compliant
• Class D 4 ohms Stable Monoblock Amplifier
Kicker CXA600.5 Amplifier (43CXA6005) Ships as 46CXA6605
• 75 Watts RMS x 4 @ 2 ohms
• 2 ohms: 300 watts x 1 chan. Subwoofer Channel
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 – 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16″W x 12-7/16″L x 2-3/8″H
Kicker CXA660.5 (46CXA6605)
• 65 Watts RMS x 4 @ 4 ohms
• 90 Watts RMS x 4 @ 2 ohms
• 180 Watts RMS x 2 @ 4 ohms (bridged)
• 150 Watts RMS x 1 @ 4 ohms (sub channel)
• 300 Watts RMS x 1 @ 4 ohms (sub channel)
• Class A/B Full-Range Channel Amplifier w/Class-D Bass Channel
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Kicker CXA800.1 (46CXA8001)
• 300 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Kicker CXA1200.1 (46CXA12001T)
• 600 Watts RMS x 1 @ 4 ohms
• 1200 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @1 ohm +/- 10%
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Class D 4 ohms Stable Monoblock Amplifier
Kicker CXA18001 Amplifier (43CXA18001)
• 1800 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 3600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 – 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16″W x 13-5/8″L x 2-3/8″H
Kicker CX-Series Car Amplifier Installation & Setup
Kicker makes your installation simple but gives you plenty of options. Make it easy on yourself when plugging in with Kicker’s KISL so you can take the high-level signals from the head unit’s speaker outputs straight into the amp’s RCA input. Also, most models are just more than two inches thick, and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
To select the ideal Kicker CX-Series amplifier, go to our comprehensive buying guide. Simply enter the make, model, and year of your car into our Fit Finder to choose the best CX-Series amplifier for your car with ease and convenience.
You can always contact our in-house professional technicians by calling us at 1-(502)-200-8010 or through our online support team. Every day of the week, our helplines are open to you!
